Category: Adhesives
Items 1 - 8 of 8
Item:
Image: (click - large view)
"Back" to return
Description:
Price:
IC-GEL Insta-Cure Paste
Stock# ADH-1
$ 6.99
IC-GEL™ is a cyanoacrylate paste that is extremely thick which comes in an applicator tube like toothpaste. It has the same bonding and curing time characteristics as MAXI-CURE™ IC-Gel™, however, can be applied to a vertical surface and will stay in place. It will not run. This can be very convenient for some assembly applications. Applying CA to the bottom of a horizontal surface such as a ceiling can be very difficult with anything other than a full standard CA bottle. IC-GEL™ can be applied at any angle with just a squeeze of the tube. The gel does have a tendency to continue to come out of the tube for about a second after pressure is released, so this must be taken into account to apply the exact amount of IC-GEL™ that you want. IC-GEL™ is an excellent putty for plastic models. It will fill any void and can be formed to many shapes. Applying INSTA-SET™ allows IC-GEL™ to be sanded or filed to final shape in less than 20 seconds. Autobody repairmen have finished their jobs in a fraction of the time by using IC-GEL™ with the additional advantage over normal body putties of superior bonding to metal surfaces. The tube measures 3.5 inches in length by about 3/4 inches in diameter. Holds .7 oz. which is 20 grams. Please read directions and all warnings on the container before use. Be sure to click on the picture for a larger view.
Quantity
Insta-Cure+ Gap Filling Glue 1 oz. bottle
Stock# ADH-2
$ 4.99
INSTA-CURE+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1inch separations on one surface, then assemble the parts, letting the pressure spread the CA out. Contains 1 ounce, which is 28.4 grams. Please read directions and all warnings on the container before use. Bottle is 2.5 inches tall, not counting the applicator tip on top and lasts a long time.
Quantity
Insta-Cure Super Thin Glue 1 oz. bottle
Stock# ADH-3
$ 4.99
INSTA-CURE™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond. Contains 1 ounce, which is 28.4 grams. Bottle is 2.5 inches tall, not counting the applicator tip on top and lasts a long time. Please read directions and all warnings on the container before use.
Quantity
Un-Cure Super Glue DeBonder
Stock# ADH-4
$ 4.99
UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once un-stuck, use acetone to clean off softened CA, then wash off with soap and water. Contains 1 ounce, which is 28.4 grams. Bottle is 2.5 inches tall, not counting the applicator on top and lasts a long time. Please read directions and all warnings on the container before use.
Quantity
Insta-Set Super Glue Accelerator
Stock# ADH-5
$ 4.99
INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam. Contains 2 ounce, which is 59.2 grams. Bottle is 3 inches tall, not counting the spray applicator on top and lasts a long time. Please read directions and all warnings on the container before use.
Quantity
Insta-Cure+ Gap Filling Glue .5 oz. bottle
Stock# ADH-6
$ 2.99
INSTA-CURE+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1inch separations on one surface, then assemble the parts, letting the pressure spread the CA out. Contains .5 ounce, which is 14.2 grams. Please read directions and all warnings on the container before use. Bottle is 2 inches tall, not counting the applicator tip on top and lasts a long time.
Quantity
Insta-Cure Super Thin Glue .5 oz. bottle
Stock# ADH-7
$ 2.99
INSTA-CURE™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond. Contains .5 ounce, which is 14.2 grams. Bottle is 2 inches tall, not counting the applicator tip on top and lasts a long time. Please read directions and all warnings on the container before use.
Quantity
BSI 2-part Quik-Cure 5 minute Epoxy
Stock# ADH-8
$ 6.99
QUIK-CURE™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress., Items bonded with QUIK-CURE™ can be handled after 15 minutes. Full strength is reached in 1 hour. Simply mix equal amounts of the hardener and 5M resin and follow directions on the bottles. Each bottle holds 4.5 oz. which is 128 grams. Please read directions and all warnings on the container before use. Be sure to click on the picture for a larger view.
Quantity
Home
